Universe Sandbox

General Category => Everything Else => Topic started by: vh on June 17, 2012, 05:27:04 PM

Title: Someone who knows something about guns
Post by: vh on June 17, 2012, 05:27:04 PM
matty does but he's sleeping? or not

anyway

am i doing it right, is that magazine in the back suposed to be there, is the scope/sight in the right place, why the hell the front grip looks to strange, and why the pony there are two triggers.
Title: Re: Someone who knows something about guns
Post by: FiahOwl on June 17, 2012, 05:34:31 PM

This message is only viewable with Universe Sandbox Galaxy Edition. Access it and much more with promo-code '73584'.

Title: Re: Someone who knows something about guns
Post by: vh on June 17, 2012, 05:36:11 PM
the magazine is in the back so i just pull it out put semtex in it, put it back in, and pewpew.
the barrel is to shoot big bullets :) what about recoil?
m-16? what is that
Title: Re: Someone who knows something about guns
Post by: FiahOwl on June 17, 2012, 05:41:10 PM

This message is only viewable with Universe Sandbox Galaxy Edition. Access it and much more with promo-code '73588'.

Title: Re: Someone who knows something about guns
Post by: vh on June 17, 2012, 05:43:38 PM
holoscope? that is a grip thingy.
handgrip
i think.


but i fixed it all. this thing has two gun thingies in case i can't press the pew button fast enough so i can shoot twice! look at this
Title: Re: Someone who knows something about guns
Post by: FiahOwl on June 17, 2012, 05:44:58 PM

This message is only viewable with Universe Sandbox Galaxy Edition. Access it and much more with promo-code '73590'.

Title: Re: Someone who knows something about guns
Post by: vh on June 17, 2012, 05:48:03 PM
those magazine are for more ammo? is that problem?

what is a hard butt end of upper reciever. also i need two scope thingies because they zoom in? so if i have two they zoom in more. i heard it works like telescope!. Also i said i use two barrels to fire faster incase my finger cannot press the pew button fast tnough.
Title: Re: Someone who knows something about guns
Post by: Darvince on June 17, 2012, 05:49:52 PM
kol fiah so harsh
Title: Re: Someone who knows something about guns
Post by: vh on June 17, 2012, 05:54:21 PM
don't worry i solve problem with double grenade launcher

EVEN has bipod instead of stoclk.
Title: Re: Someone who knows something about guns
Post by: FiahOwl on June 17, 2012, 05:55:12 PM

This message is only viewable with Universe Sandbox Galaxy Edition. Access it and much more with promo-code '73595'.

Title: Re: Someone who knows something about guns
Post by: Desacabose on June 17, 2012, 05:57:16 PM
holoscope? that is a grip thingy.
handgrip
i think.


but i fixed it all. this thing has two gun thingies in case i can't press the pew button fast enough so i can shoot twice! look at this

Don't know anything about guns, but this would most likely FAIL
Title: Re: Someone who knows something about guns
Post by: FiahOwl on June 17, 2012, 05:58:26 PM

This message is only viewable with Universe Sandbox Galaxy Edition. Access it and much more with promo-code '73597'.

Title: Re: Someone who knows something about guns
Post by: Darvince on June 17, 2012, 06:00:20 PM
fuck
kill all fuck fiahowl
kill fuck fuck
CUNTS FUCK YOU ALL YOU FUCKING PISS DRINKERS
YOU ARE FUCKING ALL ONE YEARS OLD FUCK I KNOW ALL ABOUT GUNS

./fiahowl
Title: Re: Someone who knows something about guns
Post by: matty406 on June 17, 2012, 06:31:05 PM
Okay guys chill out, firearms are complex machinery and to design ones that would function is a rule I put before looks. Of course there's many different mechanisms used in modern firearms the most common being gas operated. When I have access to a computer ill be able to explain in more detail about some rules you can stick to when concepting.
Title: Re: Someone who knows something about guns
Post by: vh on June 17, 2012, 06:33:12 PM
kol matty.
Title: Re: Someone who knows something about guns
Post by: vh on June 18, 2012, 09:10:06 AM
matty is a computerphobic apparently
Title: Re: Someone who knows something about guns
Post by: smjjames on June 18, 2012, 09:39:25 AM
For the first one, if that blocky thing in the back is suppoused to be the stock (the back end of the gun, I don't really know guns), it's way too short, looks like you need a rifle length stock.

For the last one, did you ever stop for a second and think 'how the hell would this even work?'

Also, what program are you using to create those?
Title: Re: Someone who knows something about guns
Post by: FiahOwl on June 18, 2012, 09:42:08 AM

This message is only viewable with Universe Sandbox Galaxy Edition. Access it and much more with promo-code '73649'.

Title: Re: Someone who knows something about guns
Post by: Naru523 on June 18, 2012, 09:42:43 AM
Jesus christ, calm down people, especially you, Darvince.
Title: Re: Someone who knows something about guns
Post by: vh on June 18, 2012, 09:43:22 AM
snip

this thing has no stock

stocks are a lie for people who want to make their gun bigger.
Title: Re: Someone who knows something about guns
Post by: FiahOwl on June 18, 2012, 09:46:05 AM

This message is only viewable with Universe Sandbox Galaxy Edition. Access it and much more with promo-code '73654'.

Title: Re: Someone who knows something about guns
Post by: smjjames on June 18, 2012, 09:49:10 AM
snip

this thing has no stock

stocks are a lie for people who want to make their gun bigger.

That's because it's a pistol, not a rifle. The stock is what minimizes recoil on rifles and is what you press against your shoulder, right?
Title: Re: Someone who knows something about guns
Post by: vh on June 18, 2012, 09:49:16 AM
snip

this thing has no stock

Title: Re: Someone who knows something about guns
Post by: matty406 on June 18, 2012, 09:49:52 AM
This image explains it all. You are not going to get your mags to separate into two separate receivers to get two separate barrels to operate. It does not work. It does not.
Wat? A weapon could be constructed of two receiver mechanisms each with their own magazine and barrel. And, on a related note, the Keltec KSG has two magazine tubes that feed into one barrel. (But not at the same time, it's controlled by a switch)
(http://www.onpointsupply.com/images/kel-tec_ksg_shotgun_1.jpg)

And about PMG, while it's made of existing stock parts, there's a technique in the PMg community known as blending wich you can use to create original designs, take a look here: http://www.flickr.com/groups/pimpmygun/pool/ (http://www.flickr.com/groups/pimpmygun/pool/)
Title: Re: Someone who knows something about guns
Post by: vh on June 18, 2012, 09:50:03 AM
Quote
That's because it's a pistol, not a rifle. The stock is what minimizes recoil on rifles and is what you press against your shoulder, right?

well then press your pistool to your sholder so yu minimize recoil when pewpew with pistol!
Title: Re: Someone who knows something about guns
Post by: vh on June 18, 2012, 09:50:35 AM
This image explains it all. You are not going to get your mags to separate into two separate receivers to get two separate barrels to operate. It does not work. It does not.
Wat? A weapon could be constructed of two receiver mechanisms each with their own magazine and barrel. And, on a related note, the Keltec KSG has two magazine tubes that feed into one barrel. (But not at the same time, it's controlled by a switch)
(http://www.onpointsupply.com/images/kel-tec_ksg_shotgun_1.jpg)

And about PMG, while it's made of existing stock parts, there's a technique in the PMg community known as blending wich you can use to create original designs, take a look here: http://www.flickr.com/groups/pimpmygun/pool/ (http://www.flickr.com/groups/pimpmygun/pool/)

holypony what is that thing on the top that looks like a demented railgun
Title: Re: Someone who knows something about guns
Post by: matty406 on June 18, 2012, 09:52:06 AM
If you mean the bit the ironsights are on, as it happens, it's a Picatinny rail, on which attachments are secured.
Title: Re: Someone who knows something about guns
Post by: FiahOwl on June 18, 2012, 09:52:46 AM

This message is only viewable with Universe Sandbox Galaxy Edition. Access it and much more with promo-code '73665'.

Title: Re: Someone who knows something about guns
Post by: vh on June 18, 2012, 09:52:53 AM
where do the bullets go.
Title: Re: Someone who knows something about guns
Post by: matty406 on June 18, 2012, 09:55:55 AM
WE SHALL ALL DUEL ABOUT THIS TOPIC IN #Universe_gunbox
Title: Re: Someone who knows something about guns
Post by: vh on June 18, 2012, 09:58:04 AM
has anyone ever....died....from a bullet.
Title: Re: Someone who knows something about guns
Post by: smjjames on June 18, 2012, 10:00:34 AM
@fiah: I was referring to what kipz was saying about stocks, I got what you were saying about how two gun barrels wouldn't work like that.

Still though, if you want more than one barrel, go the Gatling route. And yes I know I said I don't really know much about guns, but I do know something about them, from watching the military channel and history channel.
Title: Re: Someone who knows something about guns
Post by: vh on June 18, 2012, 10:03:12 AM
why the pony does rifle has stock but if you put stock on pistol it break your shoulder. guns make cake sense.
Title: Re: Someone who knows something about guns
Post by: smjjames on June 18, 2012, 10:09:16 AM
It would have to do with the physics of the recoil, just a guess since I don't know the technical details of why, but it likely has to do with the length of the barrel and the size of the gun.
Title: Re: Someone who knows something about guns
Post by: vh on June 18, 2012, 10:13:34 AM
i suppose we should just decoil instead of recoil. sounds much funner.
Title: Re: Someone who knows something about guns
Post by: matty406 on June 18, 2012, 10:19:46 AM
A pistol wouldn't break your shoulder, holding one up to your shoulder without a stock mod would be silly and hurt a lot from the slide going back.
Title: Re: Someone who knows something about guns
Post by: vh on June 18, 2012, 10:21:23 AM
a slide what a slide.
Title: Re: Someone who knows something about guns
Post by: FiahOwl on June 18, 2012, 10:25:46 AM

This message is only viewable with Universe Sandbox Galaxy Edition. Access it and much more with promo-code '73678'.

Title: Re: Someone who knows something about guns
Post by: matty406 on June 18, 2012, 10:26:59 AM
Don;t palm you face Fiah, weapons aren't common knowledge and there's nothing wrong with not knowing. :P
This bit:
(http://upload.wikimedia.org/wikipedia/commons/thumb/e/e6/SIG-Pro-SP2022-p1030057-58.jpg/600px-SIG-Pro-SP2022-p1030057-58.jpg)
Title: Re: Someone who knows something about guns
Post by: Desacabose on June 18, 2012, 10:44:11 AM
Don;t palm you face Fiah, weapons aren't common knowledge and there's nothing wrong with not knowing. :P
This bit:
(http://upload.wikimedia.org/wikipedia/commons/thumb/e/e6/SIG-Pro-SP2022-p1030057-58.jpg/600px-SIG-Pro-SP2022-p1030057-58.jpg)
Title: Re: Someone who knows something about guns
Post by: Darvince on June 18, 2012, 04:51:28 PM
fuck fiahowl

KILL ALL FUCK FIAH
I AM FIAHOWL I KILL ALL MUDKIPZ
FUCK MUDKIPZ
HE KNOWS NOTHING ABOUT FUCKING GUNS
I FUCKING KNOW ALL ABOUT FUCKING GUNS
YOU ARE FUCKING ONE FUCKING YEAR OLD FUCK YOU MUDKIPZ

./end fiahowl
Title: Re: Someone who knows something about guns
Post by: vh on June 18, 2012, 04:52:44 PM
^

inb4 danuked
Title: Re: Someone who knows something about guns
Post by: matty406 on February 20, 2014, 06:42:51 PM
Wat? A weapon could be constructed of two receiver mechanisms each with their own magazine and barrel.
In fact this does exist
(http://www.thefirearmblog.com/blog/wp-content/uploads/2013/01/gilboa_snake_ar_15_rifle-tm-tfb.jpg)
Title: Re: Someone who knows something about guns
Post by: vh on February 20, 2014, 07:03:24 PM
i'm back

the pk-47 (pony killer 47) assault pistol